Pro-Tools 90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (280 mm OD 1143 mm CLR) Rebar Table Size:32″ x 26-1/2″

Table Size:32″ x 26-1/2″

Apply sparingly with a non woven pad (rated equal to or just higher than your last sanding grit) and work the Butter into the surface using circular motions

The clamps are suitable for use with the Adaptive Cutting System Guide Track by sliding them onto the underside of the track where additional holding power may be needed

Note: A 1/16" bit is required to drill for hinge-mounting screws

Create your own clamp tracks anywhere you can route

Pro-Tools 90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (280 mm OD 1143 mm CLR) Rebar Table Size:32″ x 26-1/2″Specs Outside Diameter of the Tubing (OD): 28. 0 mm Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4 1 2 (114. 3 mm) Maximum Degree of