Metcal STDC Desolder Cartridge ID=0.76mm (0.03") 600 Series STDC-002 vendor_KNIPEX - Rtt: 1 x 104

- Rtt: 1 x 104 to <1 x 1011 ohms tested per ANSI/ESD STM11

Wire Dots are a wire tacking system consisting of pre-cut shapes of a thin

2x PZ Type No

240mm long blades for removing ‘O’ rings

capacitance to check motor startup capacitors and micro amps for flame sensor troubleshooting

Metcal STDC Desolder Cartridge ID=0.76mm (0.03") 600 Series STDC-002 vendor_KNIPEX - Rtt: 1 x 104Overview STDC Desolder Tip Cartridges are the standard desoldering tip range for the Metcal MX 500, MX 5200 and MX 5200 series desoldering systems. STDC Cartridges are available in 2 temperature ranges, 700 series nominally 390 C and 800 series nominally 450 C. The temperature series is designated by the first digit following the dash in the part number. e. g. 700 series will be STTC 1xx and 800 series will be STTC 8xx. Metcal recommends the 700