Metcal DCP Desoldering Tip Standard Length (∅ x L) 1.27x5.42mm DCP-CN5 vendor_HAKKO Additional Information: Flux Transfer Block

Additional Information: Flux Transfer Block Kit Type: uSMD

it helps provide a more accurate depth measurement than when locating with just a receiver and transmitter

Burst Rating6: 4X

Fusion splice preparation

Fitted with a high tech three speed reversible motor capable of 3-position power in forward and full power in reverse

Metcal DCP Desoldering Tip Standard Length (∅ x L) 1.27x5.42mm DCP-CN5 vendor_HAKKO Additional Information: Flux Transfer BlockOverview DxP Desolder Tips are the standard desoldering tip range for the Metcal desolder series MFR 1150, MFR 1350, MFR 1351 and MFR UK5. The second letter in the part number designates the temperature series. The temperature series DFP are nominally 390 C. Metcal recommends the DFP series for most applications. The Temperature series DCP are nominally 450 C and are recommended for high temperature and thermally demanding applications. Can be used