RUKO Tungsten Carbide Hole Saw Shallow Cut Ø 21mm vendor_PANAVISE Torque shank 1/4 inch (6

Torque shank 1/4 inch (6

Positioned at the entrance to the vessel/tank/silo

As a true powerhouse

Thrust bearing avoids damaging the dust boot

5 minutes ON / 5 minutes OFF

RUKO Tungsten Carbide Hole Saw Shallow Cut Ø 21mm vendor_PANAVISE Torque shank 1/4 inch (6Overview The RUKO tungsten carbide tipped hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for high chrome alloyed steels such as V2A and V4A (up to 2. 0 mm), steel and cast steel, non ferrous and lightweight metals, plastics, reinforced fabrics, plasterboard and lightweight boards, wood processing up to max. 4. 0 mm. Application Steel 900 N mm Steel 1100 N mm Steel 1300 N mm Stainless