USB-RLY16-B - 8 x 16A USB relay Logic Analyzer Control and RGB chip integrated

Control and RGB chip integrated in a 2020 SMD package

but the sensor module makes it possible to remap these pins or disconnect specific sensors altogether to free up I/O lines

1 A per phase continuously without a heat sink or forced air flow (up to 5 A peak)

Größe 24 mm x 21 mm

Mit diesem Messgerät können Sie feststellen

USB-RLY16-B - 8 x 16A USB relay Logic Analyzer Control and RGB chip integratedThe USB RLY16 B provides 8 volt free contact relay outputs with a current rating of up to 16Amp each. The processor is powered and instructed from any standard USB bus and the relay power is obtained by the DC power input adaptor. The DC input jack is 2. 1mm with positive core polarity, DC supplies are required to supply at least 500mA at 12vdc. The relays are SPCO (Single Pole Change Over) types. The normally open, normally closed and common pins are