BITalino-Elektrookulographie-Sensor (EOG) – fertig montiert hub-labor Reverse engineering of digital systems

Reverse engineering of digital systems

1/64-Schritt

Pololu universal aluminum mounting hub for 6mm shaft

Scan Angle: 360°

You can optionally solder the 1×3 header of your choice to the set of three holes along the edge of the board and use the included shorting block to connect the appropriate I/O line to the LEDON pin for dynamic control of the IR emitters (note: it is generally easier to install the 3-pin header before the larger 24-pin header)

BITalino-Elektrookulographie-Sensor (EOG) – fertig montiert hub-labor Reverse engineering of digital systemsSpecially designed electrooculography (EOG) sensor for measuring the activity of the corneo retinal standing potential. Features: Arduino compatible Differential voltage measurement Operates with 3 or 2 wire electrode cable (only one REF is required when using multiple EOGs) Gain: 2040 Measurement range: 0. 81 mV Bandwidth: 0. 0541 Hz CMRR: 110 dB Input Impedance: 100 GOhm Compatibility: This sensor is only compatible with the BITalino acquisition